Products - Implant Module

exocad's Implant Module is available as an add-on for our Dental CAD platform. With this module, custom abutments and screw-retained bridges can be designed easily.

High productivity and process reliability

Custom abutments and suprastructure can be designed together in a single CAD session. Since milling parameters for both abutment and suprastructure are correctly considered during the design phase, optimal fi tting is possible when producing all parts in one go – without the intermediate step of rescanning the produced abutment in order to design the suprastructure. When designing bridges on custom abutments, the software will ensure that all abutments holding the bridge will have the same insertion axis.

Screen shots - click to enlarge
Matching	Custom Abutment
Abutments & Bride	Screw retained bridge

Screw retained bridges

With exocad‘s implant module, the design of screw retained bridges, crowns, and copings becomes an easy task. Take advantage of our advanced screw channel design, to simplify subsequent ceramic coating and minimize risk of chipping.

A wide selection of implant libraries already included

exocad's implant module ships with a wide - and ever-growing - selection of implant libraries, including:

CADstar implant library, for usage with titanium bases
DDG implanat library, full implant geometries (engaging and non-engaging) for milling one-piece restorations°
Medentika implant library, for usage with titanium bases, supporting both 1st and 2nd generation scan abutments
nt-trading implant library, for usage with titanium bases, including support for 3D-guide and 2CONnect
Wieland ZENOTEC implanat library, for usage with titanium bases
Zfx implanat library, full implant geometries (engaging and non-engaging) for milling one-piece parts°

° not available in all markets

Note: Our OEM partners may chose to remove certain libraries from their exocad installations. exocad does not sell scan abutments; these can be obtained from the respective supplier of the implant library.

Supported scanners

The implant module requires a high-accuracy 3d scanner featuring proper integration with our Dental CAD platform.
At this time, the following scanners provide support for our implant module:

Amann Girrbach ceramill map 100, 300
smart optics activity 85, 101, 102
Solutionix Rexcan DS2 / Medit Identica
ZFXScan II and III
Zirkonzahn S600
breuckmann d-Station
OpenTechnologies
Imetric (with selected implant libraries)